Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for CAN bus. It is discrete It does not include LED indicators or key fobs, and is hidden within the vehicle's wiring.
The user can also disable the system for a short period of time by using Transport Mode when renting their car. This guide will guide you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a PIN code you select. It is undetectable by thieves using diagnostic scanners or other modern methods. It isn't able to be disabled using circuit cuts.
The system is easy to use, but it's important to have professional installation to ensure a clean and secure connection to your vehicle's ECU. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complete your vehicle's protection package.
First, the installer needs to disconnect the battery to prevent accidental airbag deployment or short circuits. After the battery has been disconnected, the installer can be able to work safely. Hand tools are essential for securing connections with precision, while a multimeter can be used to check the electrical properties and safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring tidy. Lastly, the user manual gives specific guidelines that are tailored to the Ghost Immobiliser model you have.
During the installation, it is important to choose an area for grounding that is free of debris and paint. Installers should also ensure that the immobiliser's wires, CAN H and can L are connected to the proper ECU ports. The wires can be connected or soldered depending on the model. Using a top-quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer after the installation is completed. This allows mechanics or valet parking to use the vehicle without knowing the pin code. To do this, the customer must hit the service button on the dashboard five times in the space of two seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for those who rent out their vehicles regularly through platforms like Turo. Having an immobiliser can also lower insurance costs since it reduces the likelihood of theft.
Getting Started
If you're looking for a solution that will protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from being started even if a criminal steals or copies the key. This is due to its sophisticated technology, which is designed to stop the engine from running until the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and wheel to create a unique sequence that only you know and makes it impossible for anyone else to start your car. This is the ultimate system to protect your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing a ghost ignition is an easy process, however, it's important to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you need to find and locate a permanent 12V power source as well as a good grounding point on the vehicle's chassis. Then, you can begin connecting the wires for the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a strong connection. Also, make sure to insulate the connections with heat shrink tubing or insulation tape to shield them from electrical short circuits and other problems.
After the wires are connected, you can plug in the battery and start the engine to determine whether the immobiliser works. When everything is functioning correctly you can place it in a safe location under the dash or elsewhere in the vehicle. Be sure to hide it in a secure manner so that thieves can't alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it's a top-quality deterrent for car thieves. It is impervious to key cloning and hacking and cannot be disabled without a code. It is also simple to use and is able to be put into a service valet mode so that your car will not be activated when you bring it in for servicing or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU, making it virtually undetectable as an addition to your vehicle. In contrast to other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with any of the factory settings for your vehicle.
It's also totally undetectable by thieves using diagnostic scanners. This is due to the fact that it doesn't transmit and receive radio frequency signals and it uses the CAN data format to communicate with your ECU. It doesn't even require any modifications to your current key fobs.
To make use of the Ghost Immobiliser simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. Now you can begin driving your car in a safe manner.
Once installed, Ghost Immobiliser guards your vehicle from key cloning or hacking while protecting its value. If you have to surrender your vehicle for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) and a grounding point to complete the installation of a Ghost immobiliser. Be sure that both are well-insulated and can be touched. It's also recommended to use cable ties to tie and secure the wires, as this will reduce the risk of being tampered with by thieves. Be sure to check the exact locations of these points to avoid committing a mistake and mark them with an adhesive or label. Check every connection for signs that they're wearing out. Be sure to ensure that all connections are securely in place and properly insulated. Make sure to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit functions properly and that all connections and insulation are secure. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your car's ECU to stop unauthorized motor starting. The innovative technology it uses protects your vehicle from key cloning and hacking and other typical tactics thieves employ to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to provide the most effective security for your vehicle. The Ghost's unique features, combined with its discreet design makes it a sought-after choice for drivers who love cars and security-conscious drivers.
It is crucial to follow the steps of installation in order to ensure a proper integration of Ghost Immobiliser. Consult the wiring diagram of the vehicle to help you locate and connect the wires. The next step is to identify the power source and grounding points. Once you've found them, you'll have to mark them so that they are easily identifiable when installing. It's essential to use high-quality materials and tools. Hand tools are a must with making precise connections and a multimeter can confirm electrical values and guarantee safety. Cable ties and insulation tape will keep the connections neat and tidy. Finally, a user manual will give specific guidelines specific to your Ghost model.
Before beginning the installation, it's important to test the system by entering the PIN code, then starting the vehicle. This step will confirm that the immobiliser is working as intended, preventing unauthorised vehicle start-ups. This step should be done frequently as part of your regular vehicle inspections in order to ensure the system is always functioning properly.
Once the installation has been completed, you are now able to start driving your car with confidence. The Ghost will help keep your pride and joy safe from potential thieves and ensure that nobody is able to escape with your car without the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts to steal or tamper with. This allows you to track your vehicle if it is stolen.
The Ghost is compatible with a range of vehicles, including those made by the majority of major manufacturers. Monty's Locksmith can help you secure your vehicle with this cutting edge device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, which guarantees we follow strict standards for installing our products. This guarantees customers as well as insurance companies and law enforcement agencies that installations are carried out safely and in a safe manner.